Just announced – FISHING SEASON IS OPEN

Connecticut Fish and Wildlife We are very pleased to announce that Governor Ned Lamont has opened fishing in the Inland District, including trout fishing effective today (3/24/20). All other regulations for fishing, including, but not limited to, licensing, stamps, methods, catch-and-release areas, creel limits and length limits shall remain in effect. Anglers shall practice social distancing measures, such as remaining six feet apart.

Please join Mike Beauchene on Wednesday, March 25, 2020 at 3:00 pm for a LIVE Q&A on the CT Fish and Wildlife Facebook page, about this order and any other fishing questions you may have. Do your part and stay apart as SOCIAL DISTANCING IS A MUST, even when fishing! Here is a link to the order https://portal.ct.gov/…/Lamont-Ex…/Executive-Order-No-7L.pdf.

Here are the key excerpts:

WHEREAS, fishing is a healthy outdoor activity and an opportunity to enjoy Connecticut's natural resources, provided that anglers practice social distancing by standing at least six feet apart, and not traveling in groups; and

WHEREAS, opening the fishing season early in inland waters will help to limit community spread of COVID-19 by eliminating the large crowds that often accompany the traditional Opening Day of fishing in April;

2. Early Opening of Fishing Season. Notwithstanding Section 26-112 of the Connecticut General Statutes and any associated regulations, effective immediately and through the remainder of the 2020 fishing season, unless earlier modified or terminated by the Commissioner of Energy and Environmental Protection, there is no closed season for fishing in the inland waters of Connecticut. The Commissioner of Energy and Environmental Protection may extend or modify the open seasons for inland waters fishing without notice and public hearing and issue any implementing orders she deems necessary consistent with this order. All other regulations for fishing, including, but not limited to, licensing, stamps, methods, catch-and-release areas, creel limits and length limits shall remain in effect. Anglers shall practice social distancing measures, such as remaining six feet apart.

Additionally, here is a River Report from Tuesday, March 24 - provided by Paul Dinice, member of Housatonic Valley Fly Fishers

Hi Everyone, I know this is a very difficult and troubling time for all of us. Thankfully, we can still get out and fly fish while practicing social distancing. What’s better than that to pass the monotony of being isolated. If you haven’t been out fishing in a while, go through your gear first and get familiar with the fly boxes in your vest from your last fishing excursion. Switch them out to reflect late March fishing. Some friends of mine actually developed a check list so that they don’t forget a needed tool or piece of equipment. You might want to do the same.

Upper Housatonic

After yesterday’s rain the river is running at approximately 1,600 cfs. A little bit too high to wade everywhere, but if your familiar with the river there are spots that you can access. The forecast for the next couple of days does have some more rain coming in. Hard to say how it will impact the river. Whether you nymph or streamer fish, you must get your flies down. This past weekend the weather turned a little colder. The trout might be more in a winter than spring mode. At least that’s my best guess. Not a lot of reports coming into me for the upper Housatonic. I still like using egg patterns, big nymphs like 20”inchers, yellow stones, and rubber legs. In addition to big and bold flies, I’ll fish attractor and junk stuff like mops & squimies. Keep on the lookout for little black stones. They are still out there. Don’t just fish the dries, black stone fly nymphs and wets can also work well in the prehatch hours. Finally, if there is one subsurface nymph that continually produces on the Hous, it’s the Prince Nymph. Big ones work great in early spring.

Farmington River

The Farmington is fishing very well right now and it’s chock full of fish. The State finished stocking early here and there are hold over fish and stockies up and down the river. One friend did well on small pheasant tail nymphs, another on small streamers. Again, keep looking for little black stones, winter caddis, and midge hatches. The most productive time of day is mid-afternoon when things warm up a bit. This time of year it’s hard to tell what the ‘hot’ fly will be, so try your favorites or experiment a little bit. In slower water I’ll usually go smaller. Zebra Midges and small perdigons are what I usually fish for trout still holding in soft/slower ‘winter’ pockets. Again, experimentation can lead to a very productive day.

Lower Housatonic and Salt Water

Fishing on the lower Housatonic has calmed down a bit this past weekend. I was out all along the river and there were many spinning and bait fishermen out there. Very few fish were landed. Mother nature brought us a cold snap that seemed to turn off the fish. Even the boaters had some difficult times hooking into bass. That’s not to say that the fish aren’t there. It’s just that the lower water temps shut them down temporarily. That will change dramatically soon. You just have to locate the fish when they are on the feed. There’s no magic flies here. The bass normally eat anything once active. You just have to be lucky enough to get your fly in front of them. If you have a salt water spinning rod you might want to use that to reach some fish that might not venture close enough to catch them on a fly rod. I hate to say this but fishing at dusk and into the night is the most productive time for these fish. You better dress appropriately. Don’t let being cold ruin your fishing experience.

Smaller streams & rivers

The State has also done a great job stocking smaller rivers and TMA’s. Consult your CT State Fishing guide to find out which rivers and TMA’s are available in your area. A digital copy of the Fishing Guide is available for download at http://www.eregulations.com/connecticut/fishing/ . If you haven’t gotten your license yet, get it! More than likely the only way to receive one is via online registration.

Finally, please stay safe out there. All HFFA meetings and events are canceled right now. Better times are coming and we must all stay patient and strong to get through this. Take care & Tight Lines.

All CVTU Sponsors and Supporters

To all CVTU sponsors and supporters. All of us at CVTU want to thank you for your generosity and your donations to support our fundraising. Without your gifts we would not be able to fund the many conservation and education projects we carry out year after year.

In response to the current restrictions on social gathering due to the COVID-19 crisis our banquet scheduled for this Saturday 3/28, has been postponed. We have rescheduled with Michael's at the Grove for Saturday, October 17th. We truly hope our world and country will be back to a new normal by October and we will be able to host the banquet as planned. Since we realize that the donations you made were given under totally different circumstances we would like to know if you are still able to donate as you planned? If so we will keep your donation for the October event, if not please contact banquet chairmen Mark Mcbeth or Mike Fatse at the emails below and we will honor your request; grt4dead@hotmail.comshflyguy@gmail.com

It is our hope that life and business gets back to normal and we all come through this together!

CVTU and all its members and friends wish you good luck and continued success during this difficult time. We will continue to support and promote your business via email, our Facebook page and word of mouth.

Thanks again for your support!

Mike Fatse

CVTU President

shflyguy@gmail.com

Visit us on the web at cvtu.org and on our Facebook page here for updates; facebook.com/candlewoodvalleyTU/.

You can also sign up here for our emails and newsletters;

cvtu.org/email-signup

Umpqua Signature Fly Tyers - Live on Instagram

Staring today Umpqua Feather Merchants will begin Instagram Live Tying Sessions with members of their Signature Tyer Family on Instagram. We know cabin fever is a serious issue for us folks who live life on the water and hopefully this can keep the fever at bay. Please join in on the live video and ask the tyers any questions you might have for them.

Tonight’s Tyer is Matt McCannel ​- ​Tune in this Friday 3/20 at 9pm eastern, as they go live with Matt. He'll be tying up a few of his signature patterns as well as answering a few of our questions.

To access the sessions, click the link below

https://www.instagram.com/p/B96znXgAiay/

Realities of COVID-19 and CVTU Events & Meetings

All members and supporters of CVTU are very important to us as an organization and a community. Without you we can't accomplish any of the great work we do. 

We are all experiencing the effects of COVID-19, and we all are adjusting our realities accordingly. In light of this, and with direction we have been given by Federal, State & Local leadership, and TU's National leadership, we are effectively canceling all in person and indoor events for at least 30 days.

This includes our April Chapter meeting, and all other events on our calendar. We will send updates periodically as things change. We will also keep our website and Facebook page up-to-date, so check CVTU.org and facebook.com/candlewoodvalleyTU/.

The following is a note from TU's President & CEO Chris Wood, in response to COVID-19, regarding TU Chapter events during these difficult times.


Dear Trout Unlimited leader:

We are all adapting to the new realities of the COVID-19 virus. Because of our concern for the health and well-being of our employees, we are closing all of TU's offices and requested all TU staff to work from home. We have also canceled all travel.

We are in a very fluid situation, and new information is rapidly emerging. Yesterday, the White House urged that we all avoid social gatherings in groups of 10 or more people. 

Here is what the  CENTERS FOR DISEASE CONTROL say:"Older adults and people who have severe underlying chronic medical conditions like heart or lung disease or diabetes seem to be at a higher risk for developing more serious complications from COVID-19 illness. People who are at higher risk are encouraged to avoid crowds as much as possible."

For that reason, all in-person and indoor Trout Unlimited events and gatherings, including chapter meetings, are cancelled for the next 30 days. We will assess where we stand in 30 days and have further guidance at that point. Small group outings may proceed with all of the proper precautions taken about social distancing.

COVID-19 has everyone on edge. Please be safe and be careful, but also enjoy the time with family and friends, and the people you love. Know that we will get through this together, and we will continue the good work of protecting and restoring the places we live, love, and fish.
Please let me know if you have any questions, and I wish you and your families all the best.

Chris

Fly of the Month - March - Jig Flies

Fishing with jig nymphs is not new but has recently gained in popularity as Euro Nymphing techniques take hold. Fishing with traditional nymphs, bead-heads and indicators can still be effective, but you’re always adjusting the indicator and/or nymphs to get your rig to the right dept, which is on, or near, the bottom. Once your rig is on the bottom, there are the inevitable snags and lost flies. Whether you tie your own flies or not, it gets expensive. Jig nymphs ride hook point up thereby reducing snags and lost flies, even when they’re ticking across the bottom.

Jig flies use special jig hooks like Firehole Outdoors 516’s, Fulling Mill FM5045, and Tiemco TMC413J. You’ll also need a slotted tungston bead, that fits perfectly on the 60 degree vertical hook eye. You can tie stoneflys in size 8 and 10, pheasant tail variations from 12 to 18, caddis pupae and larvae, the variety is endless. You can even tie jig streamers.

Some of the best YouTube videos are on channels from Fly Fish Food, TightLine Video, and The Fly Fiend. This month we’ll tie jig flies. There’s no particular pattern we’re suggesting, so tie up 8 of your favorite pattern and bring them to the March meeting. For examples check with John Hildenbrand, Mark McBeth or Dave Suroweicki.

CVTU Attends Fly Fishing Show in Edison, NJ

Over the weekend of January 25th and 26th, members of CVTU attended the Fly Fishing Show at the New Jersey Convention and Exposition Center in Edison, New Jersey. The exhibit showcased more than 230 vendors, over 50 featured fly tyers, and over 50 seminars and presentations.

New Jersey Convention & Exposition Center, Edison, NJ

There were all the major rod and reel manufacturers, local northeast fly shops like TCO Fly Shop, Tight Lines Fly Fishing, and Dette Flies, and dozens of outfitters offering global adventures in fly fishing. There was plenty to see and plenty to buy. As always, there were some pretty unique innovations including TFO’s new rod that can move between a 10’6” nymph rod 9’ dry fly rod, simply by removing a rod section. No need to carry two rods or re-rig. Pretty cool.

The crew at Topgolf… L to R; John Hildenbrand, Mark McBeth, Jeff Huie, Dave Shaw, Eric Nadoban, Emery Mersich, Dave Suroweicki

There was an endless selection of fly tying materials at bargain basement prices, and deals were there to be made. Just ask John H. about the bin full of assorted materials he got for $20. The crew spent at good 30 minutes sorting through a large bin of tungsten beads in all colors and sizes. At about .15 to .17/bead, they were hard to pass up.

Saturday evening was spent at Topgolf Edison for some food & beverage and spirited driving range heroics. These guys can cast a fly better than they can hit a golf ball. The accommodations at Home2 Suites were excellent and affordable with free breakfast thrown in.

We’re already looking forward to next year. Ask any of the crew for more details at our next meeting or event.

Emery & Dave telling lies to Tom Rosenbauer in the Orvis booth

Eric Nadoban admiring Dave’s golf swing

Mark scored some Mardi Gras beads from MarshOnTheFly outfitters

Mark scored some Mardi Gras beads from MarshOnTheFly outfitters

Topgolf on Saturday night
 

How to Tell the Difference Between Stocked and Wild Trout - Flylords Mag

This is a question that recently came up when I was fishing with a couple of CVTU members, Paul Ingrassia and John Lorenzo. It is something I wonder about every time I put a trout in the net. In this article, Flylords Magazine answers the question pretty clearly. If you’re armed with this knowledge, you should be able to tell if a fish is wild, stocked or a holdover from last year’s stocking.

https://flylordsmag.com/how-to-tell-the-difference-between-stocked-and-wild-trout/

Comments are welcomed

Tight lines,

Mark

Fly of the Month - February - Simple Rabbit Strip Streamer

This month we’ll be tying Streamers for the high, off-color waters of Spring. There are many effective streamer patterns that can be used on our local rivers and lakes to catch trout as well as bass. For this month’s example we’ll focus on using a rabbit strip, which is probably one of the most effective and varied materials for streamers.

A good strong 2X long streamer hook with dumbbell eyes is a great place to start, as the dumbbell eyes will help the streamer ride hook point up on the strip, avoiding snags. Add some rainbow dub (or other colors), some flash, and rubber legs to complete the pattern.

There are many other patterns and instructional videos on YouTube, so be sure to search for streamers that appeal to you and the fish.

Be sure to bring 8 streamers to February’s chapter meeting for the fly swap.

Fly of the Month - January - "Squirmy Worm"

In our streams and lakes in the northeast, aquatic worms are everywhere and a major food source year-round for fresh water game fish. The Squirmy Worm is perhaps the best worm imitation us fly fishermen have in our boxes. And we need not be embarrassed to tie one on and fish it. When there are no rising fish, the water’s high, or the traditional pheasant tails and soft hackles aren’t working, a “Squirmy” is often the ticket.

The pattern only has 4 materials; hook, bead, thread, and squirmy wormy material. It’s a relatively quick tie once you’ve figured out how to control the slippery squirmy stuff. The YouTube video provided by Fly Fish Food has some convenient tips on how to make your squirmies behave when being fastened to the hook. Be sure to tie them in different colors with different beads. Keep a bunch in your box to use as an anchor on a Euro rig or under an indicator. They work well on the swing and you’ll get a ton of hits downstream in fast water.

Don’t worry about the comments from the traditionalists. You’ll be catching more fish than them anyway.

Euro Nymphing Reels: What Really Matters?

In this article from tcoflyfishing.com, learn the truth about Euro Nymphing Reels…

Trout reels. Strike up any conversation about reels and you are bound to hear the old adage that all they need to do is hold your line. For a long time, I pretty much held that conviction. To be honest, for the vast majority of situations, I still agree with the concept. As long as the reel is durable and functions every time you use it, does it really matter which reel you have? The basic answer here is that most of the time it doesn’t. The reason a lot of people have such a dismissive view of reels when it comes to trout is because normally, stripping in your fish by hand is all you need to land even very large fish. Even if you do put a fish on the reel, trout don’t require an insane amount of pressure to keep them at bay. Palming a click reel or tightening your drag knob on a disc drag reel will do the trick. At the end of the day, fish fighting technique is more important to landing fish. 

Read More